Knowledge Base, Manuals & Downloads

00593 Weather Station

0593 AcuRite Wireless Weather Station

Manual Wireless Deluxe Weather Station Instruction Manual 00593  [PDF]
Icon Definitions Click here
Replacement Parts Sensor 00984 (discontinued)
Specifications Indoor Temperature Range: 32º to 122º F, 0º C to 50º C
Outdoor Temperature Range: -4º to 158º F, -20º C to 70º C
Humidity Range: 20% to 99% RH
RF (wireless) Range: 100' (30m)
Wireless Frequency: 433 MHz
Power: 5 AA alkaline or lithium batteries


Troubleshooting
Problem Possible Solution
No outdoor
temperature
  1. Bring both units indoors and position side by side.
  2. Remove the batteries from the outdoor sensor only.
  3. On the indoor (display unit), where the outdoor temperature should be displayed, just above that you will see the word “OUTDOOR”. Is there a number next to it?
      a) IF YES: Press and hold the channel button on the front of the main unit until the number disappears.
      b) Press and release the channel button once, if another number appears, repeat step (a). If no number appears, continue to step (c).
      c) IF NO:
    Press and hold the channel button until you hear the main unit beep.
  4. Reinstall batteries in the outdoor sensor.
  5. Press and release the TX button inside the sensor right above the batteries. (First button on the left)
  6. The display on the main unit should now have a temperature reading from the outdoor sensor. 

No outdoor 
sensor
reception
 

• Relocate the display unit and/or the outdoor sensor. The units must be within 100 ft (30 m) of each other.
• Make sure both units are placed at least 3 feet (.9 m) away from electronics that may interfere with the wireless communication (such as TVs, microwaves, computers, etc).  
• Use standard alkaline batteries (or lithium batteries in sensor when temperature is below -4ºF/-20ºC). Do not use heavy duty or rechargeable batteries. NOTE: It may take up to 20 minutes for display unit and sensor to synchronize after batteries are replaced.
Inaccurate
temperature
or humidity
• Make sure both the display unit and sensor are placed out of direct sunlight and away from any heat sources or vents.
• Make sure both units are positioned away from moisture sources.
Change Time Zone
To change the time zone, press and hold the "-" button on the front of the display unit until a letter appears in the seconds display. While this letter is flashing press and release the "-" button until the letter for your time zone displays, P - Pacific, M (looks like nn) - Mountain, C - Central, E - Eastern.

 

 Didn't find what you're looking for? We're here to help: (877) 221-1252 or info@chaney-inst.com

Models: 00593, 00593a2, 00593w 

_