| Manual |
AcuRite Weather Station 00424CA / 00522 [PDF] |
| Icon Definitions | Click here |
| Replacement Parts | Replacement Sensor: 606TX Replacement Battery Cover for Sensor: 592606BC |
| Specifications | Indoor Temperature Range: 32º to 122º F, 0º C to 50º C Outdoor Temperature Range: -40º to 158º F, -40º C to 70º C Temperature Accuracy: up to +/- 4°F; Learn More RF (wireless) Range: 165' (50m) Wireless Frequency: 433 MHz Data Reporting: 30 second updates Power: 4 AA alkaline or lithium batteries (not included) |
| Troubleshooting | |
| Problem | Possible Solution |
| Outdoor temperature is flashing or showing dashes |
Flashing of the outdoor temperature is generally an indication of wireless interference. |
|
Select degrees |
To select between degrees Fahrenheit (ºF) or Celsius (ºC) temperature units, press the ºC/ºF button located inside the battery compartment of the display. |
| Hi / Low records | High/low records automatically clear every 24 hours. The time records are cleared is determined by the time the unit was powered on. For example, if unit was powered on at 6:00 pm, then high/low records reset at 6:00 pm daily. |
|
No outdoor |
If the wireless signal indicator shows no bars: • Relocate the display unit and/or the outdoor sensor. The units must be within 165 ft (50 m) of each other. • Make sure both units are placed at least 3 feet (.9 m) away from electronics that may interfere with the wireless communication (such as TVs, microwaves, computers, etc). • Use standard alkaline batteries (or lithium batteries in sensor when temperature is below -4ºF/-20ºC). Do not use heavy duty or rechargeable batteries. NOTE: It may take up to 20 minutes for display unit and sensor to synchronize after batteries are replaced. |
| Inaccurate temperature |
• Make sure both the display unit and sensor are placed out of direct sunlight and away from any heat sources or vents. |
| Display screen not working |
• Check that the batteries are installed correctly. Batteries may need to be replaced. |
Questions? We're here to help. Phone +1 877 221-1252 | AcuLink Technical Support +1 844 228-5465 | Email: info@chaney-inst.com | Community forum: http://support.acurite.com
models: 00522, 00522sbdi, 00424CA, 00522SBDIA1
_
► Installation
|
Step-by-step directions with video to set up your 5-in-1 weather sensor for maximum accuracy. |
Step-by-step directions with video to set up your 3-in-1 weather sensor for maximum accuracy. |
Maximize the wireless range of AcuRite's 433 MHz wireless technology for superior performance. |
|
Sensor siting helps install your sensors in the way that best captures the data that is most important to you. |
AcuRite recommends new, high quality, name brand alkaline batteries for the best product performance. |
|