1-262-249-3259
0Item(s)

You have no items in your shopping cart.

Search

Product was successfully added to your shopping cart.
Knowledge Base, Manuals & Downloads

00424CA / 00522 Thermometer

00522 AcuRite Wireless Weather Station

Manual

AcuRite Thermometer Instruction Manual 00424CA / 00522 [PDF]

Français: Guide d'instructions 00424CA / 00522 [PDF]

Español: Manual de instrucciones 00424 / 00522 [PDF]

Icon Definitions Click here
Replacement Parts Replacement Sensor: 606TX
Specifications

DISPLAY

Display Dimensions: 4.3-inches Height x 2.5-inches Width x 1.4-inches Depth
Indoor Temperature Range: 32º to 122º F, 0º C to 50º C

Temperature Accuracy: +/- 2 degrees Fahrenheit; Learn more
Power: 2 AA alkaline batteries


TEMPERATURE SENSOR

  Outdoor Temperature Range: -40 to 158 degrees Fahrenheit, -40 to 70 degrees Celsius
  RF (wireless) Range: 165 feet (50 meters)
  Data Reporting: 30 second updates
  Wireless Frequency: 433 MHz
  Power: 2 AA alkaline or lithium batteries; Lithium batteries recommended for temperatures below -4 degrees Fahrenheit / -20 degrees Celsius


ACCURACY

  Temperature Accuracy: +/- 2 degrees Fahrenheit; Learn more



Troubleshooting
Problem Possible Solution
Outdoor
temperature
is flashing or
showing dashes

Flashing of the outdoor temperature is generally an indication of wireless interference.
1. Bring both the sensor and display unit indoors and remove at least one battery from each.
2. Reinstall the battery in the outdoor sensor.

3. Reinstall the battery in the display unit.
4. Let the units sit within a couple feet of each other for about 20 minutes to gain a strong connection.

Select degrees
Fahrenheit or Celsius

To select between degrees Fahrenheit (ºF) or Celsius (ºC) temperature units, press the ºC/ºF button located inside the battery compartment of the display.
High / Low records High/low records automatically clear every 24 hours. The time records are cleared is determined by the time the unit was powered on. For example, if unit was powered on at 6:00 pm, then high/low records reset at 6:00 pm daily.

No outdoor 
sensor
reception
 

If the wireless signal indicator shows no bars:
• Relocate the display unit and/or the outdoor sensor. The units must be within 165 ft (50 m) of each other.
• Make sure both units are placed at least 3 feet (.9 m) away from electronics that may interfere with the wireless communication (such as TVs, microwaves, computers, etc).  
• Use standard alkaline batteries (or lithium batteries in sensor when temperature is below -4ºF/-20ºC). Do not use heavy duty or rechargeable batteries. NOTE: It may take up to 20 minutes for display unit and sensor to synchronize after batteries are replaced.
Inaccurate
temperature 

• Make sure both the display unit and sensor are placed out of direct sunlight and away from any heat sources or vents.

Display screen
not working
• Check that the batteries are installed correctly. Batteries may need to be replaced. 

 


Questions? We're here to help.

Phone +1 262 249-3259  |  My AcuRite Technical Support +1 262 203-5667 |  Community forum: http://support.acurite.com


models: 00522, 00522sbdi, 00424CA, 00522SBDIA1, 00522SBDIA2

_

  Installation

 

install the AcuRite 5-in-1 weather sensorInstall the 5-in-1 Weather Sensor

Step-by-step directions with video to set up your 5-in-1 weather sensor for maximum accuracy.

install the AcuRite 3-in-1 weather sensorInstall the 3-in-1 Weather Sensor

Step-by-step directions with video to set up your 3-in-1 weather sensor for maximum accuracy.

maximize wireless range troubleshootingGet the Best Wireless Range

Maximize the wireless range of AcuRite's 433 MHz wireless technology for superior performance.

how to site a weather sensorSensor Siting to Maximize Accuracy

Sensor siting helps install your sensors in the way that best captures the data that is most important to you.

acurite battery requirementsBattery Requirements for AcuRite Products

AcuRite recommends new, high quality, name brand alkaline batteries for the best product performance.