0Cart

You have no items in your shopping cart.

Search

Product was successfully added to your shopping cart.
Knowledge Base, Manuals & Downloads

02028 / 02053 Thermometer

02028 AcuRite Digital Thermometer

Manual

AcuRite 02028 instruction Manual [PDF]
Français: Guide d'instructions 02028 [PDF] [PDF]

Icon Definitions Click here
Replacement Parts Replacement Sensor: 606TX
Replacement Power Adapter: 2028AD
Specifications

Display

Indoor Temperature Range: 32 to 122 degrees Fahrenheit; 0 to 50 degrees Celsius
Temperature Accuracy+/- 2 degrees Fahrenheit
Power: 5V power adapter (included; recommended for optimal display color), 3 AA alkaline batteries (not included)
Dimensions: 4.6-inch Height x 2.9-inch Width x 2-inch Depth

SENSOR

Temperature Range: -40 to 158 degrees Fahrenheit; -40 to 70 degrees Celsius
Temperature Accuracy: +/- 2 degrees Fahrenheit
Wireless Range: 165 feet / 50 meters depending on home construction materials
Wireless Signal: 433 MHz
Data Reporting: 30 second updates
Power: 2 AA alkaline or lithium* batteries
*Lithium batteries recommended for temperatures below -4 degrees Fahrenheit / -20 degrees Celsius
Dimensions: 4.8-inches Height x 1.6-inches Width x 0.9-inches Depth
AcuRite Environment Systems Compatible: No

 

 

Troubleshooting
Problem Possible Solution

No outdoor sensor reception

If the wireless signal indicator shows no bars:

  • Relocate the display and/or the outdoor sensor. The units mus be within 165ft (500m) of each other.
  • Make sure both units are placed at least 3 feet (.9m) away from electronics that may interfere with the wireless communication (such as TVs, microwaves, computers,etc.)
  • Use standard alkaline batteries (or lithium batteries in the sensor when temperature is below 4ºF/-20ºC). Do not use heavy-duty or rechargeable batteries. NOTE: It may take a few minutes for display and sensor to synchronize after batteries are replaced.
  • Outdoor temperature is flashing or showing dashes

    Flashing of the outdoor temperature is generally an indication of wireless interference.
    1. Bring both the sensor and display indoors, side by side and remove power adapter/batteries from each.
    2. Reinstall batteries in the outdoor sensor
    3. Reinstall adapter/batteries in the indoor display.
    4. Let the units sit within a couple feet of each other for a few minutes to gain a strong connection.

    Inaccurate temperature

    Make sure that both the display unit and sensor are placed out of direct sunlight and away from any heat sources or vents.

    Display screen not working

    Check that the power adapter is plugged into the display and an electrical outlet.


    Questions? We're here to help.

    Phone +1-262-729-4852  |  My AcuRite Technical Support +1-262-729-4850 |  Community forum: http://support.acurite.com


     

    Models: 02028, 02028A1, 02053CADI