Knowledge Base, Manuals & Downloads
02028 / 02053 Thermometer
|Manual || |
AcuRite 02028 instruction Manual [PDF]
Français: Guide d'instructions 02028 [PDF] [PDF]
|Icon Definitions ||Click here |
|Replacement Parts ||Replacement Sensor: 606TX |
Replacement Power Adapter: 2028AD
|Specifications || |
Indoor Temperature Range: 32 to 122 degrees Fahrenheit; 0 to 50 degrees Celsius
Temperature Accuracy+/- 2 degrees Fahrenheit
Power: 5V power adapter (included; recommended for optimal display color), 3 AA alkaline batteries (not included)
Dimensions: 4.6-inch Height x 2.9-inch Width x 2-inch Depth
Temperature Range: -40 to 158 degrees Fahrenheit; -40 to 70 degrees Celsius
Temperature Accuracy: +/- 2 degrees Fahrenheit
Wireless Range: 165 feet / 50 meters depending on home construction materials
Wireless Signal: 433 MHz
Data Reporting: 30 second updates
Power: 2 AA alkaline or lithium* batteries
*Lithium batteries recommended for temperatures below -4 degrees Fahrenheit / -20 degrees Celsius
Dimensions: 4.8-inches Height x 1.6-inches Width x 0.9-inches Depth
AcuRite Environment Systems Compatible: No
|Problem ||Possible Solution |
No outdoor sensor reception
If the wireless signal indicator shows no bars:Relocate the display and/or the outdoor sensor. The units mus be within 165ft (500m) of each other. Make sure both units are placed at least 3 feet (.9m) away from electronics that may interfere with the wireless communication (such as TVs, microwaves, computers,etc.) Use standard alkaline batteries (or lithium batteries in the sensor when temperature is below 4ºF/-20ºC). Do not use heavy-duty or rechargeable batteries. NOTE: It may take a few minutes for display and sensor to synchronize after batteries are replaced.
Outdoor temperature is flashing or showing dashes
Flashing of the outdoor temperature is generally an indication of wireless interference.
1. Bring both the sensor and display indoors, side by side and remove power adapter/batteries from each.
2. Reinstall batteries in the outdoor sensor
3. Reinstall adapter/batteries in the indoor display.
4. Let the units sit within a couple feet of each other for a few minutes to gain a strong connection.
Make sure that both the display unit and sensor are placed out of direct sunlight and away from any heat sources or vents.
Display screen not working
Check that the power adapter is plugged into the display and an electrical outlet.
Questions? We're here to help.
Phone +1-262-729-4852 | My AcuRite Technical Support +1-262-729-4850 | Community forum: http://support.acurite.com
Models: 02028, 02028A1, 02053CADI
Category: Thermometers & Hygrometers
Tags: 02028 02028a1 02053cadi